Minilec (India) Pvt. Ltd. is an ISO 9001 company with global presence in more than 30 countries. It was
the first Indian company to launch Single Phasing Preventer & Micro-processor based Alarm
Annunciators in India. The products are thoroughly type tested at reputed test houses such as
CPRI, ERDA, ETDC and SISIR Singapore , as per IEC Standards. |
| Phase Failure Relay |
These relay sense the Negative Sequence Voltage components of system supply &
offers protection against Phase Failure, Phase Sequence Reversal with Under/Over
Voltage conditions which are dangerous to motor winding and cause motor
burnouts. Various models with different features are available like VSPD1, VSPD2,
HLVD2, ALVD2, P1PFS1, etc. useful for 3 phase Motor/Pump, Mains Supply, Generator Voltage faults,
AMF / Transfer Switch panels. |
Phase Failure Relay
|
| Motor / Pump Protection Relay |
These relay sense the Negative Sequence Current components of system supply and
offers protection against Phase Failure, Phase Unbalance & Phase Sequence Reversal
with Overload protection (IDMTL curves) & Under load protection (dry run for pumps).
They eliminate conventional bimetal (thermal) overload relay with superior protection
level. Model MPRD2 is for motors and SPGD2/F3DRC1 is for pumps (with dry running
Protection). These are to be used with current sensor CTS. Recommended for
effective Motor Protections in Machine Tool, Compressors & pumps. MBMPR is
microprocessor based motor protection relay offers voltage, current, temperature-based
protection for incoming & outgoing ends. Other aided safety features like
stalling (Locked rotor), Earth Fault, etc. Commander-M is a microprocessor based
pump protection & pump management system, suitable for 2 pumps.
|
Motor / Pump Protection Relay
|
| Liquid Level Controllers |
Available for conductive liquid like Water and for non conductive liquids like Diesel, Oil
etc. Level controllers for conductive liquids are supplied with or without stainless steel
electrodes. Various models are available, for single level and two level control
(WLCD1/P1LCW1) and two level & two tank control (P2LCW1). Level controllers for
non conductive liquids are supplied with photo sensor and are suitable for one level
(DLCD1+FRKP1) or (FRKP2 sensor with open collector output). |
Liquid Level Controller
|
| Alarm Annunciators |
Complete range of Microprocessor Based Alarm Annunciators MICROWARN 9600, MBAS
9400, MBAS 9600, MBAS 9700 from 4 windows upto 96 windows in different size 45 x 45
mm (normal), 30 x 30 mm (small), 30 x 65 mm (big) & 50 x 70 mm (large) and colour
(Red, Green, Amber/Yellow) are available. Replaceable windows sizes and availability of
serial port (RS 232) output for computer connection. Highly suitable for process plants,
Diesel Generator sets, Central control rooms, etc. Features : NO/NC Fault Site Selectable,
ISA Standard Sequence Selectable, Supply Fail Indication, Repeat Relay for Parallel
annunciation, 5 years warranty.
|
Alarm Annunciator
|
| Voltage Scanners |
The Voltage Scanners (VSC33 & VSC34) monitor, control & display the system voltage. The
microprocessor based Voltage Scanner (F3VSR1 & F3VSR2) are powered to protect the connected
3-phase system loads against poor voltage supply conditions, which can cause damage. The user
can have the power & convenience to view and monitor incoming 3-phase supply and disconnect
the load if the supply becomes abnormal. Thus it can protect the connected load against poor
quality power supply and give fault alarm indications. Models with optional RS 232 serial link are
available. Powerful PC software empowers the user to store and diagnose historical data & record
events with time stamping. Applicable in LT Power Distribution panels, Motor starter & PLC panels,
Auto mains failure panels, Generator panels, Air/Gas compressor panels, Telephone & Mobile
Exchanges, Incoming 3 phase, UPS, etc. |
Voltage Scanner
|
| SCADA Systems |
Minilec has developed system for Remote Monitoring and Control of various equipments used in
building, factories or manufacturing plants.
The scheme of Remote Monitoring SCADA System will consist of :
SCADA hardware - Signal Conditioning & Processing of Inputs
Local LCD display module
RS 485 port output
Interface Converter RS 232 - RS 485 port and vice versa
Dedicated Computer Terminals
Applications : Pump Automation & Remote Monitoring, HT/LT Substation, Remote Monitoring for
Building Facilities Management, Status Monitoring & Intelligent Control of AC Plants, Power Houses, etc.
|
|
| Electronic Motor Starter EMS-2000 |
| This newly introduced Electronic Motor Starter (Soft Starter) is packed with unique features and is designed for stand
alone applications from 5HP-60HP motor ratings. EMS-2000 has energy saving mode, it continuously monitors the
motor load & automatically applies control output voltage to the motor so as to improve the power factor and the power
consumed by the motor. In addition, current control, kick voltage, soft stop, etc. are useful features. |
Electronic Motor Starter EMS-2000 |
|
