Automatic Grease Lubricator |
|
Easylube is ideal for equipment requiring continuous lubrication, especially equipment installed in remote, difficult-to-access, and/or difficult-to-work in areas. This self-contained unit dispenses grease or oil and provides worry-free operation with its microprocessor control and monitoring functions. Unit is battery-operated to meet a wide range of applications. It is also UL Listed for use in hazardous areas to meet both lubrication and safety requirements. |
FEATURES
• Easylube 150 uses micro- computer CPU & equipped with infrared pulse detector for accurate motor operation.
• Refillable grease cup allows unit to be used repeatedly
• Operates on easily loaded & replaceable battery pack
• Corrosion, dust and moisture resistant
• Rating: UL rated for Class I, Division 2, Groups B, C and D: Class II, Division 2, Groups F & G hazardous locations
Explosion-Proof , the new model has been upgraded to V.40 model & approved by UL for Hazardous Location·
• Operates with a balanced pressure from bearing resistance
• Warning light flashes when grease supply is exhausted or feed blockage occurs or when encountering excessive back pressure Warning light flashes when grease supply is exhausted or feed blockage occurs or when encountering excessive back pressure.
• Can be remote mounted up to 15 feet away from lube point for difficult-to-reach areas
• Dispensing time can be set from 1 to 12 months and unit can be turned off For machine downtime.
|
BENEFITS
• With Easylube 150 your bearing gets the fresh and clean grease at the right time with the right amount. Since the controlled relubrication & greasing operates virtually with a balance pressure.
• The Easylube 150 it is a select items of re-lubrication maintenance controller and it is designed to solve all single point's
re-lubrication problems for maintenance engineers.
• Easylube 150 it is designed to last through over 10 years of use. A simple low cost replacement kit is all customers is required to use our products again and again with only seconds required to change the lube cartridge and battery pack only.
• Easylube 150 it will eliminates routine manual re-lubrication in the outdoor or indoor, -200C to +600C, dry and wet, and any industry applications on the Electromotor, Air Compressors, Water Pumps, Air Handling Units, Extra Fans, Blowers, Conveyers, and any kind of bearing of equipments, even difficult-to-access regular lubrication points need never miss out now.
• Perhaps best of all, the Easylube 150 it will do a better job for a remarkably low price allow your maintenance cost to Reduce sconsiderably.
|
Request
Quote
Dispensing Control System By Unique Infrared Pulse Signal Detection, Synchronized with Motor actuated Mechanism |
Dispensing time and volume easily adjustable from
1 to 12 months |
Time Setting |
Switch On |
Time Setting |
Switch On |
30 days |
1M (1) |
210 days |
1+2+4M (7) |
60 days |
2M (2) |
240 days |
8M (8) |
90 days |
1+2 M(3) |
270 Days |
1+8M (9) |
120 days |
4M (4) |
300 Days |
2+8M(10) |
150 days |
1+4 M(5) |
330 Days |
1+2+8M (11) |
180 days |
2+4 M(6) |
360 Days |
4+8M (12) |
* Test Function : 1+2+4+8 (15) all switch on |
* Reverse Function : 1+4+8 (13), or 2+4+8 (14) |
Reference settings for inner diameter of bearing
(or diameter of shaft) |
Over 100mm |
1 Month |
86mm - 100mm |
2 Months |
73mm - 85mm |
3 Months |
63mm - 72mm |
4 Months |
51mm - 62mm |
6 Months |
38mm - 50mm |
8 Months |
Under 38mm |
10-12 Months |
Reference settings for amount of grease by
manual
grease gun |
Every 1-2 days |
5-8 strokes |
1 Month |
Every 3-4 days |
5-8 strokes |
2 Months |
Weekly |
5-8 strokes |
3 Months |
Weekly |
8-12 strokes |
4 Months |
Two Weeks |
8-12 strokes |
6 Months |
Monthly |
8-12 strokes |
8 Months |
Monthly |
5-8 strokes |
10 Months |
Two Months |
5-8 strokes |
12 Months |
|
|
|
|
Reference Table For Dispensing Time & Grease Volume
| Time Setting |
Switch |
Daily |
Weekly |
Monthly |
1 M |
1 |
5.00 ml |
35.00 ml |
150.00 ml |
2 M |
2 |
2.50 ml |
17.50 ml |
75.00 ml |
3 M |
2+1 |
1.67 ml |
11.67 ml |
50.00 ml |
4 M |
4 |
1.25 ml |
8.75 ml |
37.50 ml |
5 M |
4+1 |
1.00 ml |
7.00 ml |
30.00 ml |
6 M |
4+2 |
0.83 ml |
5.83 ml |
26.00 ml |
7 M |
4+2+1 |
0.71 ml |
5.00 ml |
21.43 ml |
8 M |
8 |
0.63 ml |
4.38 ml |
18.75 ml |
9 M |
8+1 |
0.56 ml |
3.89 ml |
16.67 ml |
10 M |
8+2 |
0.50 ml |
3.50 ml |
15.00 ml |
11 M |
8+2+1 |
0.45 ml |
3.18 ml |
13.64 ml |
12 M |
8+4 |
0.42 ml |
2.92 ml |
12.50 ml |
|
Exhaust
Fans
|
Air
Compressors
|
Air
Condition Unit
|
Motors
|
Exhaust
Fans
|
Cooling
Tower
|
Conveyor
|
Pumps
|
|
| |
|
